If you find water in your phone’s charging port, you have several options. You can try compressed air or a vacuum hose to remove the water. If these methods do not work, you can use rice to absorb the water. Also, try avoiding using heat lamps. Using a vacuum hose is the best method to remove water from your phone’s charging port. If none of these methods work, try the next best option.
How to Get Water Out of the Charging Port
If you’ve ever had water in your phone’s charging port, you’re not alone. It happens to the best of us at some point or another. Even if your phone doesn’t break, the excess water is enough to cause some issues.
In this case, a vacuum hose can come in handy. Not only does it remove excess water from your phone, it also prevents the water from damaging your phone in the future.
The best way to get water out of the charging port on a phone or computer is to turn it upside down, wear gloves, and make sure the charging port is pointed downward. While you’re at it, you can even try using a vacuum hose to extract the water.
This method may be risky, so be sure to follow these instructions carefully. If you’re not sure whether or not this will work, try calling your phone’s customer service.
You can use compressed air to remove water from the charging port on your phone or computer. This method is much safer than using Q-tips, as the compressed air will not damage your device.
Then, simply spray the port with compressed air, which should loosen up the condensation. Make sure to spray in short bursts and from different angles to avoid damaging the device’s internal structures.
Using cotton swabs or paper towels can be another method to remove moisture from the charging port, but this method will also leave tiny cotton dust particles inside the port. The same goes for using a vacuum hose, which can remove moisture but not liquid dirt.
Injecting items into charging ports can damage them by leaving debris. If the port is wet, using rice is not the best solution. Rice contains fine particles that can cause damage to the port and the phone.
If your phone or computer has a water-damaged charging port, try soaking it in dry rice. This method has been around for years, and almost always yields positive results.
It works even if you’ve tried to dry it with wool and other common household materials, but it may actually damage your device and leave fine debris in the charging port. You can use a silica gel sachet to keep the rice from getting into the charging port.
You can also use silica gel packets to dry out your phone. Instant rice works less well, but silica gel is a more effective method. You can buy them in electronics and shoe boxes, and make sure to label them “do not eat.”
Avoid heat lamps
If you’ve accidentally let water into the charging port of your phone or computer, you should turn off the device and then use a static-free towel to dry it out. To be safe, you should turn off your phone for at least half an hour, and then test the charging port for any visible moisture.
If the port still shows water, you should wait 24 hours before turning it back on, as doing so may cause further damage.
To avoid heating your device while charging, place it near a fan or near a window. Avoid using heat lamps and heaters, as they can increase the temperature of the port and potentially damage the phone’s exterior. You can also clean the charging port with a soft cotton cloth. This method is particularly useful if the water is hard to remove by using a heat-resistant towel.